This is for gsxr 1000 cases
If you deside to run With out the oil cooler you can do this mod
Drill out and open the sub galley to 11-12mm and the Main galley to 14mm, small port match the oil pump outlet With block, use dremel in the oil pickup hole and grind away the lip you see in there, also need to open the filter adapter and chamfer it alot, this With some more chamfring and enlarging have giving me alot of pressure and volume in the motor
I have never seen less then 30-35 psi at idle hot
Amazing right
If you deside to run With out the oil cooler you can do this mod
Drill out and open the sub galley to 11-12mm and the Main galley to 14mm, small port match the oil pump outlet With block, use dremel in the oil pickup hole and grind away the lip you see in there, also need to open the filter adapter and chamfer it alot, this With some more chamfring and enlarging have giving me alot of pressure and volume in the motor
I have never seen less then 30-35 psi at idle hot
Amazing right